Thank You for Visiting Quicksilver Radio Products
 See us at Dayton 2012,  booths 462-463-464-465-469-470-471-472 -- Click here for Our Hamfest Schedule

Our new retail store is open.  Click for details.

Sign up here  ------>>
for our free monthly newsletter.

  No spam, ever.  We promise! 
Special pricing for subscribers, plus news, tech tips, projects, and more.  Click your browser's "back" button after you get the confirmation page.

* Email

* First Name

* Last Name

Email Messaging You Can Trust

(almost) Everything Except the Rig

Countdown to Dayton 2012     


New!
Andy-Crimp Pro™ Crimper

The Most Versatile Powerpole Crimper Available
No other tool does all of this:
Our new Andy-Crimp Pro crimps 15, 30, 45, 50, and 75 amp Powerpoles.  But that's just for starters!  It also does Molex and similar connectors, like the DC power connectors used on most rigs, as well as insulated and uninsulated terminals.  The available dies are interchangeable with our coax crimp tool sets.
Nothing else on the market comes even remotely close to doing all of that.

All at an incredible introductory price of just $49.73!! See it here.

The Ultimate
Powerpole and Coax Strip, Prep, and Crimp Kit

Our Best Set Yet
Our new prep, strip, and crimp set is just what you need.  Full cycle ratchet crimper specifically designed to install coax connectors.  Strips and Crimps RG-8, 213, 8X, 58, 174, 316, 59, 6, 11, LMR-400, LMR-240, 9913, and others. PLUS! It includes our exclusive Andy-Crimp Pro™ Powerpole die set to crimp 15-30-45-50-75A Powerpoles, Molex Connectors, insulated and uninsulated terminals. and more.  All in a sturdy, custom designed ABS case.
Special introductory price of just $129.73  Go here

 

Time for a Road Trip

We're about to leave for our annual "Southern Swing". 
Over the next month, we'll be exhibiting at Hamfests in Richmond, VA; Orlando, FL; Brooksville, FL; and Dalton, GA. 
We expect to be able to ship most orders from the road, but there may be some delay in getting them out. 
Normal shipping will resume when we return at the end of February.

Time for a Road Trip

 

Home
Anderson Powerpoles and Accessories
PowerPals™ Cables with Anderson Powerpoles
DC Power Cables, Connectors. and Accessories
Soldering
Equipment
Wi-Fi and USB Accessories
NEW!

Water-Shed™
Coax Sealing Tape

Connectors and Adapters
VHF/UHF Antennas
High Quality, High power Baluns
Antenna Wire and Rope
Ladder-Line, Coax Cable
Low-Loss Coax
HF Antennas
Coax Feed-Through
Panels
Antenna Mounts
Pass that Test!
Click here for tips and tricks on getting your license or upgrade

Our new retail store is open.

Please read through the following information before you call or visit!

For your convenience, we've opened a retail store in Meriden, CT.

Since we expect to maintain a full schedule of Hamfests through the year,
store hours will be limited.  Click here for our Hamfest Schedule

As you can see, there are very few weekends available, so we'll be open mostly during the week.  We hope to stay open at least one evening until 7:00 PM. or later, generally Thursday.

We will not be selling new radios.  We suggest contacting our good friends at KJI Electronics for your needs.

You won't find fancy fixtures, and showcases.  If you've seen our display at any Hamfest in the Northeast, you know what to expect.  As time goes on, we'll be expanding our selection to better accommodate your needs.  For now, most all of the items on our Web Site will be available.

You will find Anderson Powerpoles and assembled cables; a wide variety of DC Power cables and accessories; ladder line, coax cables and jumpers in several sizes and lengths; antenna wire of many types; high quality antenna rope, pulleys, and insulators; baluns; speaker mics and speakers; antenna mounts for almost any vehicle; HF, VHF, and UHF antennas for base, mobile, and portable use; connectors and adapters for most RF cables; tools, SWR meters and voltmeters; plus plenty of other handy items and gadgets to make Ham radio more fun. 

But even more important, you will find honest and knowledgeable advice and service from experienced hams who live by a few simple rules:

1. Treat the customer the way we would like to be treated
2. Never sell anything we would not use ourselves
3. When in doubt, refer to rules 1 and 2.
 

Please call first before making a trip to the store!
Please call first before making a trip to the store!!
Please call first before making a trip to the store!!!

Can we be clearer?

If we answer the phone, we're there.  If we don't, chances are good that we're off to a Hamfest, visiting a supplier, running errands, or even <gasp> taking a day off. 
You may wish to check in advance that the items you need are in stock.

Our store address is:
Quicksilver Radio Products
387 South Colony Street
Meriden, CT 06451
(203) 440-4973

Here are easy directions:

Note:  Mapquest, GPS, friends, "helpful" guys on the repeater, etc. may recommend different routes.  Unless you know Meriden well -- for example, you know the difference between South Colony Street, Colony Street, North Colony Street, North Colony Rd, Old Colony Rd, Old North Colony Rd, Colony Heights, and Colony Place -- and you know where Perkins Street is, even though it doesn't really exist any more -- we strongly suggest that you follow the directions below. 
But it's your choice.

From the Merritt/Wilbur Cross Parkway, CT Route 15
(note that commercial vehicles are not allowed on the parkway):

Get off at Exit 66 (US Rte 5).  Turn right to go north on Rte 5.  Go appx 2.1 miles to Hall Avenue (Citgo Station on the left).  Turn left onto Hall Avenue.  At the end of Hall Avenue turn right onto Old Colony Road.  Go north appx 1/2 mile (bearing right at the fork) onto South Colony Street.  Look for Tom's Garage on the left side, we're just a little bit past that.  The building is set back from the street about 150 feet, and we share it with Macri Sign Company.  If you get to the railroad underpass, you went too far.

From Interstate 91 Southbound:

  Take Exit 18 to I-691 West.  Get off at Exit 8 (Broad St. US Rte 5) and turn left to go south on Rte 5.  Go appx 1.8 miles to Hall Avenue (Citgo Station on the right).  Turn right onto Hall Avenue.  At the end of Hall Avenue turn right onto Old Colony Rd.  Go north appx 1/2 mile (bearing right at the fork) onto South Colony Street.  Look for Tom's Garage on the left, we're just a little past that.  The building is set back from the street about 150 feet or so, and we share it with Macri Sign Co.  If you get to the railroad underpass, you went too far.

From Interstate 91 Northbound:

Take Exit 15 to CT Route 68.  Turn left to go west on 68.  Go appx 2 miles, and take the US Rte 5 exit.  Turn right to go north on Rte 5.  Go appx 2.4 miles to Hall Avenue (Citgo Station on the left).  Turn left onto Hall Avenue.  At the end of Hall Avenue turn right onto Old Colony Road.  Go north appx 1/2 mile (bearing right at the fork) onto South Colony Street.  Look for Tom's Garage on the left, we're just a little past that.  The building is set back from the street about 150 feet or so, and we share it with Macri Sign Co.  If you get to the railroad underpass, you went too far.

From the Greater NYC area:

Navigate to Interstate 95 Northbound.  Take that to New Haven CT, and take Interstate 91 North; OR -- the Hutchinson River Parkway becomes the Merritt/Wilbur Cross Parkway in Connecticut.  Either way, then follow the above directions.

 From Interstate 84 Eastbound:

Take I-84 through Waterbury CT.  Take Interstate 691 East.  Get off at Exit 8 (Broad St. US Rte 5) and turn left to go south on Rte 5.  Go appx 1.8 miles to Hall Avenue (Citgo Station on the right).  Turn right onto Hall Avenue.  At the end of Hall Avenue turn right onto Old Colony Rd.  Go north appx 1/2 mile (bearing right at the fork) onto South Colony Street.  Look for Tom's Garage on the left, we're just a little past that.  The building is set back from the street about 150 feet or so, and we share it with Macri Sign Co.  If you get to the railroad underpass, you went too far.

From Interstate 84 Westbound:

Take I-84 into Hartford CT.  Take Interstate 91 South.  Take Exit 18 to I-691 West.  Get off at Exit 8 (Broad St. US Rte 5) and turn left to go south on Rte 5.  Go appx 1.8 miles to Hall Avenue (Citgo Station on the right).  Turn right onto Hall Avenue.  At the end of Hall Avenue turn right onto Old Colony Rd.  Go north appx 1/2 mile (bearing right at the fork) onto South Colony Street.  Look for Tom's Garage on the left, we're just a little past that.  The building is set back from the street about 150 feet or so, and we share it with Macri Sign Co.  If you get to the railroad underpass, you went too far.

From California:

Take Interstate 80 East appx 2800 miles to Hazelton, PA.  Take Interstate 81 North to Scranton PA.  Take Interstate 84 East through Waterbury CT.  Take Interstate 691 East.  Get off at Exit 8 (Broad St. US Rte 5) and turn left to go south on Rte 5.  Go appx 1.8 miles to Hall Avenue (Citgo Station on the right).  Turn right onto Hall Avenue.  At the end of Hall Avenue turn right onto Old Colony Rd.  Go north appx 1/2 mile (bearing right at the fork) onto South Colony Street.  Look for Tom's Garage on the left, we're just a little past that.  The building is set back from the street about 150 feet or so, and we share it with Macri Sign Co.  If you get to the railroad underpass, you went too far.

 

 

Contact Information

If the information on our site does not answer your questions, please send us an e-mail and we'll do our best to answer promptly.

E-mail
General Information: info@qsradio.com
Sales: sales@qsradio.com
Customer Support: support@qsradio.com
Webmaster: webmaster@qsradio.com

Retail Store Address:

Quicksilver Radio Products

387 South Colony St

Meriden, CT 06451

 

Go here for directions and information about the store

 

 

To order:

 

We accept PayPal on-line payments.   Your personal check is also welcome.  Our mailing address is:

 

Quicksilver Radio Products

387 South Colony St.

Meriden, CT 06451

 

If you're ordering by mail, please include a list of what you are ordering, your shipping address, and telephone and/or e-mail address.  We generally ship within 1 or 2 business days after receiving your order.

 

Shipping & Handling to US Addresses:

 

Order Total

Shipping

$.01 - $9.99

$5.99

$10.00 - $49.99

$7.99

$50.00 - $99.99

$10.99

$100.00 - $200.00

$12.99

Over $200

$15.99

 

Attention International Customers:

 

Because shipping costs can vary widely depending on weight, we cannot specify a price when you order.  We will let you know by email after the order is placed.  In general, small, light orders run about US$10 - US$15 and ship by International First Class Mail.  Larger, heavier orders can cost up to (and possibly exceed) US$45.  They ship by International Priority Mail.  Our goal is be as fair as possible with international shipping costs.  If you place an order and then feel that the shipping cost is too much, we will cancel the order at your request, with no penalty cost incurred by you.

 

We reserve the right to ship orders by whatever method we deem best in all cases.

 

 

Need more info?  E-mail info@qsradio.com.

Thanks and 73,

John Bee, N1GNV

 
Send mail to webmaster@qsradio.com with questions or comments about this web site.
Copyright © 2002-2012 Quicksilver Radio Products
Last modified: 06/20/09