|
| |
Don't Play Russian Roulette With Your Finals!
TuneRite™ Modules let you adjust your antenna tuner or
screwdriver antenna at low power -- without all that button pushing, mic
holding, menu juggling nonsense.
 |
TuneRite-I |
Makes the "Tune" button work on most recent ICOM
HF Rigs. |
For IC-703,
706, 718, 736, 746, 756, 765, 775, etc.
Plugs into the tuner jack. Switches the radio to 10W CW and puts out a carrier for 8-10 seconds, then
returns to previous setting.
No more button-pushing, no more tuning up into a bad load at full power. Save time, trouble, and your finals!
Note: Works on HF bands only. |
18.00 |
|
 |
TuneRite-K |
Similar to above, but for most recent Kenwood
Rigs. |
For
TS-50, 450, 850, 950, 570, 2000, 480, etc.
Plugs into the tuner jack. Switches the radio to 10W CW and puts out a carrier for up to 30 seconds,
then returns to previous setting.
No more button-pushing, no more tuning up into a bad load at full power. Save time, trouble, and your finals!
NOTE: With the TuneRite™ installed, both models
of the TS-480 will put out 100W maximum |
18.00 |
|
 |
TuneRite-Y |
Similar to above, but for Yaesu FT-857 & FT-897 |
Plugs into the ACC jack. Switch it on, the
radio puts out a carrier at approximately 15W. Switch it off and the
radio returns to your previous setting. No more button-pushing, no
more tuning up into a bad load at full power. Save time, trouble, and
your finals! |
30.00 |
|
 |
|
|
The TuneRite™ for Yaesu FT-857 and FT-897 is
simple to build, even for a complete novice. All it takes is a switch,
3 batteries, a resistor, and a regular 1/8" stereo plug. Schematic and
info is at left, or in pdf
format here |
|
|
|
